Jolting Apparatus
Jolting Apparatus
SPARES and ACCESSORIES:
The Jolting Apparatus consists of a rectangular table
rigidly connected by two support arms to a spindle at a horizontal
distance of 800mm from the centre of the table. There is a projecting
lug with a plane face on the lower face of the table beneath which is a
stop with a rounded upper surface. The table can be raised and allowed
to fall freely on the stop by a cam which is connected to a motor and
gear box through a V-belt and pulleys. The cam rotates at a rate of 60
rev. /min. A stroke counter fitted with micro-switch is provided which
stops the machine after surmounted by the hopper can be clamped rigidly
to the table. Supplied complete with mould and hopper. Suitable for
operation on 230 Volts, single phase. A.C.supply.
SPARES and ACCESSORIES:
(1) Steel mould with base plate having three compartments. Internal dimensions.
(2) Apparatus for demoulding the specimen.
(2) Apparatus for demoulding the specimen.
No comments:
Post a Comment
Note: only a member of this blog may post a comment.